Protimeter Damp Meters
Protimeter MiniMost widely used moisture meter
The Protimeter Mini is a compact, general purpose moisture meter for checking the moisture levels for a vast range of quality control and dampness diagnosis applications.
Simple readings
Direct readings of surface moisture are taken through two small pins. A colour coded scale enables the user to assess the moisture level at a glance.
The numerical values represent the actual percent moisture content of wood (%MC) and the wood moisture equivalent (WME) of other materials. The Protimeter Mini can be used to determine if the fabric of a building is in a dry, borderline or damp condition.
Design enhancements
The Protimeter Mini incorporates a range of design refinements and features that make it much simpler to use. The stylish instrument case fits snugly in the hand with a rubber edging for comfort, so it can be used effortlessly for long periods. The new display is very bright for visual clarity.
If the instrument is inadvertently left on, the energy saving feature automatically switches off the instrument after five minutes to conserve the battery life.
CODE: BLD2000
Protimeter TimbermasterThe Protimeter Timbermaster is a simple, easy to use moisture meter specifically designed for the timber industry.
The Protimeter Timbermaster is ideal for a range of quality control applications associated with the production, trading and use of wood products.
This compact instrument has eight calibration scales, enabling the user to take accurate moisture measurements in 150 wood species. When necessary, it can be used with a temperature probe that automatically corrects the measured moisture level with respect to the temperature of the wood being tested.
CODE: BLD5604
Protimeter AquantThe Protimeter Aquant is used to assess and monitor the relative moisture level of building materials including plaster, drywall, masonry, concrete and fiberglass (GRP).
It is ideal for checking the relative moisture condition of building elements such as solid walls and floors prior to more rigorous and time-consuming investigatives.
The Protimeter Aquant is ideal for checking behind or below surface coverings that would normally prevent a direct reading being taken.
Leak paths in shower cubicles (behind ceramic tiles), in caravans/motor homes and mobile homes can be identified with the Protimeter Aquant before visible water damage occurs.
Also, this instrument may be used for surveying GRP boat hulls for the early detection of damp spots that could lead to blistering caused by osmosis.
The Protimeter Aquant has a digital display that is synchronized with a colour-coded LED scale. The display shows the relative moisture level of the material under investigation on a scale of 0-999 and the colour coded LED scale indicates the material’s moisture condition.
CODE: BLD5760
Protimeter Hygromaster - Humidity MeterThe Protimeter Hygromaster is a hand-held instrument for taking spot measurements, logging humidity temperature values, relative humidity, dew point, mixing ratio and ambient temperature which are shown on a split display at the touch of a button.
CODE: BLD7700
Protimeter SurveymasterThe Protimeter Surveymaster incorporates two modes of operation - Search and Measure
This combination enables the user to distinguish surface moisture from sub-surface moisture, essential information when trying to establish the extent and cause of a dampness problem.
Search mode (non-invasive)
Measures moisture beneath the surface without drilling holes to a nominal depth of 0-12mm. Hold against the wall to allow a radio signal to penetrate the surface.
Measure mode
Enables the user to take direct readings of the surface moisture.
The measure mode can be used with:
1. A two-pin head-and-lead for awkward corners and under work surfaces.
2. A set of ‘deep wall probes’ that are insulated but for their tips providing quantitative WME readings at depth, regardless of surface dampness and surface contamination by salts.
CODE: BLD5360