Testo Dampmeters

Testo Wood and Material Moisture Meter

The Testo 606-1; wood and material moisture meter, includes: protective cap, batteries and calibration protocol.

Testo 606-1 measures material moisture. Material moisture is displayed in percent by weight using stored material characteristic curves for wood and building materials.

• Accurate wood moisture measurement with stored characteristic curves for beech, spruce, larch, oak, pine, maple.
• Backlit display for ease of use in low light.
• Storage temperature: -40 to +70 °C
• Operating temperature: -10 to +50 °C
• Battery type: 2 batteries Type AAA
• Battery life: 200 h
• Weight: 90 g
• Dimensions: 119 x 46 x 25 mm
• Additional characteristic curves to locate wet points in building materials for cement screed, concrete, plaster, anhydrite screed, cement mortar, lime mortar, brick
• Hold function for easy readout of readings
• Display illumination
• Self-test function
• Protective cap for safe storage
• Belt case, wrist strap and calibration protocol included

CODE: T6061    

Testo Moisture, Humidity and Temperature Meter

This moisture / damp meter also incorporates sensors to measure the humidity and air temperature at the same time as measuring the moisture in wood, concrete, plaster, brick etc This is a typically high quality German built product which comes complete with protective instrument cover and leather look belt holster. Supplied with batteries and instructions.

• Precise measurement of wood moisture with stored characteristics curves for beech, spruce, larch, oak, pine, maple
• Further characterisitcs curves for cement screed, concrete, plaster, anhydrite screed, cement mortar, brick
• Hold function for easy readout of measurement values
• Display illumination
• Self-test function
• Protective cap for safe storage
• Including wrist strap and belt holder
• Measurement of temperature and humidity of the ambient air
• Air humidity measurement with the long-term stable Testo humidity sensor
• Incl. dewpoint calculation and wet bulb

Operating temperature -10 to +50 °C Battery type 2 batteries Type AAA Battery life 130 h Dimensions 119 x 46 x 25 mm Probe type NTC Meas:

• Range -10 to +50 °C
• Accuracy ±0.5 °C
• Resolution 0.1 °C

Probe type Conductive measurement cell Meas:

• Range 0 to 90%
• Accuracy ±1%
• Resolution 0.1

Probe type humid. Sensor:

• Range 0 to 100 %RH
• Accuracy ±2.5 %RH (5 to 95 %RH)
• Resolution 0.1 %RH

CODE: T6062    

DampMetersDirect.com Copyright © 2009. Interetia Ltd All Rights Reserved